| |
 NO.01 FACE MILL GRINDING
ATTACHMENT |
This attachment
comprises a base, swivelling
horizontally with respect
to table,and a workhead
swivelling at a 15 degree
angle.This construction
simplifies greatly the
setting of elevation
and
depression angle.Further
more,rugged design
gives the M-40 the capacity
for grinding large size
cutters and tools.
Capacuty:Max. dia. of
cutter..........18"(457mm)C |
|
 |
|
 |
| |
NO.02 RADIUS GRINDING
ATTACHMENT |
This
is ideal for sharpening
the radii of ball
endd mills and styli.
It consists of two
slide bases,each with
micrometer adjustment
and a workhead having
a M.T.No.5 or B&S
No.12 taper hole
spindle.Indexing of
straight flutes cutters
is possible by using
an index plate mounted
on the back of workhead.
Capacity:
Radius................................0-2"(0-50mm)
(in case that max.dia
of cutter is 4"(100mm)
Taper hole:M.T.No.5.or
B&S No.12(specify
by order)
Convenient for grinding
of ball end mills
& styli.
|
|
|
|
NO.03 RADIUS GRINDING
ATTACHMENT |
This
is suitable for corner
radius grinding of
face mills and shell
end mills.The position
for grinding start
is set by the micrometer
to eliminate grinding error.The
grinding capacity
of this attachment
is 0 through 1"
radii (0 through 25mm)and
0 to 12"
Capacity:
Radius.............................0-1"(0-25mm)
Max.dia.of cutter..................11
3/4"(300mm)
An accurate radius
on the.corner of teeth
can be ground. |
|
 |
|
 |
| |
NO.04 HELICAL GRINDING
ATTACHMENT |
This
attachment is suitable
for grinding the relief
and rake
angle of spiral cutters
or the straight teeth
of hobs,end mills
and center drills.The
work spindle is possible
to be turned twice
at max.for the lead
of 0 through unfinity.
Taper hole of work
spindle is M.T.No.4.
Lead:0-8(stepless)
Spindle turns twice
at max.
Index:24(Standard)
Grinding length:max.12/1/2"
Grinding length:max.12/1/2"(320mm)
(in case that helic
angle is 0°
Moudule(Hob):max.8°
Helix(Hob):max.±8° |
|
|
 |
| |
NO.05 CYLINDRICALGRINDING
ATTACHMENT |
This
attachment is most
suitable for straight
or taper cylindrical
grinding of various
tools.
Capacity:
Swing.............10"(250mm)
Main spindle speed......310rpm.(50c/s)
370rpm.(60c/s)
Motor..................1/4HP.(0.2Kw) |
|
|
 |
| |
NO.06
INTERNAL GRINDING
ATTACHMENT |
This
is generally used
with the Cylindrical
Grinding Attachment.of
course,it can be
used for grinding
internal tapers.
Capacity:
internal spindle.............20,000rpm
Length of hole up
to 1-9/16"
or 3"(40mm
or 75mm)
Range of bore to
be ground:﹛@@5/16"-3/4"(8-20mm)or
1/2"-2"(12-50mm) |
|
|
 |
| |
NO.07
WORKHEAD INDEXING
ATTACHMENT |
Accurate
indexing can be made
quockly and easily
by mouniting the Indexing
Attachment on the
standard workhead.This
liminates the need
for a tooth rest which
is normally required
for grinding cutters.
If not specified,workhead
indexing attachment
is provided with a
plate of twenty for
equally spaced slots.
includes one 24 notched
index plated Extra
index plates.......specify
number of notches
desired. |
|
|
 |
| |
NO.08
EXTENDED GRINDING
WHEEL SPINDLE |
This
attachment offers
extreme convenience
when the extended
spindle application
is required.As this
spindle is also cartridge
type construction,it
is readily interchangeable
with standard spindle.
Spindle extension
is 3"(75mm)Extension
Convenient when the
extended spindle application
is required.Spindle
is also cartridge
type and interchangeable
with standard spindle. |
|
|
 |
| |
NO.09
SURFACE GRINDING ATTACHMENT
|
This
is a so called "Universal
Vise and ideally suited
to grinding bits as
well as surface grinding.It
consists of a swivel
vise and independent
support provided between
the vise and base.The
intermediate support
permits the vise to
swivel 360degrees
horizotally and vertically,so
the work-piece can
be set easily.
Capacity:
Width of vise............4"(100mm)
Depth of vise............1"(25mm)
Opening.................2
3/4"(70mm) |
|
|
 |
| |
NO.10
DRILL POINTING ATTACHMENT |
| This
attachment have been
designed to provide
a simple, effective
means of sharpening
drills accurately with
the minimum of skill.The
drill itself is held
in a precision six jaw
self-centring chuck,suitably
geared to the operationg
handle. |
|
|
 |
| |
NO.11
LATHE & PLANER TOOL
GRINDING ATTACHMENT |
This
attachment facilitates
setting cutters for
grinding rake face
and relief angles.The
large work support
provides an outstanding
grinding capability
This attachment is
ideally suited to
grinding cutters for
lathes and planers.
Capacity:3/8"-1
1/2"(10-38mm)
Convenient for grinding
rake face and relief
angles. |
|
|
 |
| |
NO.12 SPRING COLLET
CHUCK |
This
chuck can be mounted
directly in the taper
hole of the workhead
a ASA No.50.This is
an indispensable attachment
for small cutter grinding.Spring
Collet Chuck for large
size cutters or adapter
for 5C collets is
also available.
Size of
collets:
6,8,10,12,16,20,25(mm)or1/4,5/16,3/8,1/2,5/8,3/4,1
(inches). |
|
|
 |
| |
NO.13
WET GRINDING ATTACHMENT |
This
is so called "Coolant
Supply System".It
is
conveniently used for
cylindrical,internal,surface
and
various cutters grinding
works when necessary.
Coolant pump motor.........1/8HP(0.1kW |
|
|
 |
| |
NO.14 DUST COLLECTOR |
This
accessory contributes
toward operator safety
and his health by collecting
dust particles flying
off
the grinding wheel during
grinding.It is compact
and consumes a minimum
of floor space. |
|
|
